Bathroom Guide

My bathroom sink faucet has no pressure. I changed the faucet and it worked great for about a week. Help!?

The water doesn't come out that much. What's wrong?

Public Comments

1. sounds like you have something in the line stopping it up--take new faucet off again and flush lines out real good-flush water backwards thru faucet attempting to flush it out-try again-as long as you have pressure to service lines you know thats good--had same problem one time-all it was a speck of what ever it was stopped whole sink from working
2. un-screw and clean the screen at the spout!
3. check aerator[screen]then work back,just a piece of calcium
4. After checking the aerator If this was a 2 handle old faucet take off the supply lines and check to see if a screw from one of the washers fell in the supply line( supply line 3/8 copper tubing going from valve under sink to faucet connection) Or if its an older home check to see if you have galvanized water piping ,over years of use galvanized pipe rusts from the inside out and causes loss of pressure in hot and cold lines or if you have a pressure problem throughout the whole house it might be your prv valve on your water meter (pressure reducing valve) Might have to be turned up a bit try checking the water pressure with a gauge . Good luck